Specific Process Knowledge/Pattern Design/CleWin

From LabAdviser
< Specific Process Knowledge‎ | Pattern Design
Revision as of 15:50, 3 August 2020 by Jehan (talk | contribs) (Reverted edits by Jehan (talk) to last revision by Bghe)


Feedback to this page: click here

Mask Design Software

At DTU Nanolab we offer all users of the cleanroom free access to CleWin 5 for their mask layout.

Find the official CleWin 5 User Guide here. This document can also be found in the CleWin 5 installation directory (C:\Program Files (x86)\CleWin5) if you have made a local installation. We also offer a self study Mask design course. Find it here.

CleWin 5 - installation on your Windows PC

CleWin 5 software package
  • Install Clewin 5
  1. Open this link in Windows Explorer: U:\Nlab\CleanroomDrive\_TPT\TPT Mask Design\For CleWin\CleWin 5 software
  2. Run the installation program CleWin5_64bit_setup.exe or CleWin5_32bit_setup.exe depending on your Windows version (32bit or 64bit)
  3. After installation start the program Clewin 5.
  4. You will be asked for a registration file. Open the file clereg.dat located in the same directory as the installation file.
  5. You should now be ready to use Clewin 5.
  • Opdate Clewin 5:
  1. Open Clewin 5
  2. Save any unsaved work.
  3. Click on Help in the menu bar.
  4. Click on "Check for updates...".
  5. If an update is available it will be downloaded and you will be prompted to restart Clewin 5.
  6. Done!

Please contact Jesper Hanberg if you have any problems.

CleWin 5 - installation on your Apple or Linux computer

For this to work your need to run some kind of Windows emulator on you Apple or Linux machine. After having installed Windows, Clewin installation is the same as for Windows.

No guarantee for it to work!

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Pattern_Design/CleWin&oldid=37183"