Feedback to this page: click here

THIS PAGE IS UNDER CONSTRUCTION

Booking in LM

Find the Lab Manager booking rules here: Booking rules

Logbooks in LM

Presentation on how to use the Process Logbooks in LM: Howto - Process logbooks in LM

Equipment Cross Contamination

Equipment with LabManager Lock

Some equipment is equipped with a "LabManager Lock". This is an electronic switch that allows use of the tool only if you are logged in on LabManager. It looks like this:

RED means: No-one is logged in. You are not able to use the equipment. Some feature on the tool is disabled so that you cannot use it. What is disabled differs from equipment to equipment. It can be the monitor that does not turn on, the furnace will not load or the shutter not turn on.
YELLOW means: The equipment is under service. You are under no circumstances allowed to use the equipment.
GREEN means: Someone is logged in. You are able to use the equipment, but make sure it is you that is logged in.

Orderlines in LM

When you use the cleanroom, use equipment or buy wafers your project or department will be charged according to the DTU Danchip pricebook. You can review the charges if you click the "Orderlines" in the LabManager main menu. Note for the cost indicated is the cost for commercial activities. The actual cost charged depends on what kind of project your are working on. See the DTU Danchip pricebook for details. You have the possibility to correct the orderline e.g. if it is charged on the wrong project or you had forgot to log out of a tool. Click on the [Change] field to the right of the line. A new line opens where you can edit the amount, project, text or date. If you edit the amount the change has to be acknowledged by Danchip first.

Purchase of wafers

Data transfer from equipment

How to transfer data from some equipment in the clean room: Manual for remote.dtu.dk

General info

You can find important information about the clean room in LabManager here: Documents with General Information

As of December 2014 it contains:

Safety Documents
  Approved Chemicals
  Temporarily Approved Chemicals
  Procedure for sikkerhedsgodkendelse af nyt og flyttet udstyr (SI 3.0.1.1)
  Beredskabsplanen (SI 3.2.1)
  Alarmsystemet (SI 3.2.3)
  Ansvarlige (SI 3.2.4)
  Procedure for approval of new chemical (SI 3.3.6)
  Safety policy on Danchip (SI 3.4.2)
  Generelle regler for arbejde i renrum (SI 3.5.1)
  Rules for working in the cleanroom (SI 3.5.1)
  Regler for arbejde med kemi på Danchip (SI 3.5.2)
  Rules for working with Chemistry in the Cleanroom (SI 3.5.2)

Cleanroom Documents
  Booking Rules
  Cross Contamination
  Cleanroom Map
  Manual for remote.dtu.dk (data transfer)