Specific Process Knowledge/Thermal Process/Annealing

From LabAdviser

Feedback to this page: click here

Annealing

At Danchip we have seven furnaces and an RTP for annealing: A1, A3, C1, C2, C3, C4, noble furnace and RTP. Annealing normally takes place in an N2 atmosphere. PECVD PBSG is annealed in an wet atmosphere which will also oxidize the silicon substrate.

  • Anneal with N2 can be done in furnaces:A1,A3,C1,C2,C3,C4, noble furnace and RTP
  • Wet anneal with H2O in a bubbler can be done in furnaces:C1 and C3.

Comparison of the seven annealing equipments

A1
Boron drive-in
A3
Phosphorous drive-in
C1
Anneal oxide
C3
Anneal bond
C4
Anneal aluminium
Nobel furnace RTP
General description Drive-in of boron deposited in the boron pre-dep furnace(A2) or drive-in of ion implanted boron. Can also be used for oxidation. Drive-in of phosphorous deposited in the phosphorous pre-dep furnace(A2) or drive-in of ion implanted phosphorous. Can also be used for oxidation. Annealing and oxidation of wafers from the B-stack and PECVD1. At the moment also used for general annealing and oxidation of 6" wafers. Annealing and oxidation of wafers from NIL. Annealing of wafers with aluminium. Annealing and oxidation of any material. Rapid thermal annealing.
Annealing with N2 x x x x x x x
Wet annealing with bubler (water steam + N2) . . x x . . .
Process temperature [ oC ] 800-1150 800-1150 800-1150 800-1150 800-1150 22-1000oC 22-1000oC
Batch size max. 30 wafers of 4" or 2" max. 30 4" wafers or 2" wafers max. 30 wafers of 6",4" or 2" max. 30 4" wafers or 2" wafers max. 30 4" wafers or 2" wafers 30x4" or small pieces 1x4" or small pieces
Which wafers are allowed to enter the furnace: A1
Boron drive-in
A3
Phosphorous drive-in
C1
Anneal oxide
C3
Anneal bond
C4
Anneal aluminium
Nobel RTP
New clean* Si wafers 4" (6" in C1) . . . x x x x
RCA clean** Si wafers with no history of Metals on x x x x x x x
From Predep furnace directly (e.g. incl. Predep HF**) From A2 From A4 x x x x x
Wafers directly from PECVD1 . . x x x x x
Wafers directly from NIL bonding . . . x x x x
Wafers with aluminium . . . . x x .
wafers with other metals . . . . x .
wafers with III-V materials x

*New clean: only right from the new clean box. It is not allowed to put them in another box first.

**These wafers must be placed in a "transport box from RCA to furnace" using the RCA carrier when doing RCA or the pre-dep carrier after pre-dep.