Specific Process Knowledge/Etch/ICP Metal Etcher/silicon oxide

From LabAdviser

Slow etch of SiO2 with resist as masking material - with direct clamping

This recipe can be used for slow etching of SiO2 with resist as masking material when normal clamping is possible. Normal clamping is prefered because it give the best and most repeatable cooling of the wafer. Here are some test results presented.

Parameter Resist mask
Coil Power [W] 200
Platen Power [W] 25
Platen temperature [oC] 0
CF4 flow [sccm] 20
H2 flow [sccm] 10
Pressure [mTorr] 3


Results Test on maskless wafer
Etch rate of thermal oxide 64.9 nm/min (100% etch load) (22-01-2014)
Selectivity to resist [:1] No result
Wafer uniformity (100mm) ±0.8% (22-01-2014)
Profile [o] Not tested
Images (click on the image to view a larger image)
Contour plot of the etch rate over the wafer, 9 points measured
Comments