Specific Process Knowledge/Characterization/SIMS: Secondary Ion Mass Spectrometry

Feedback to this page: click here

Atomika SIMS

Atomika SIMS: positioned in the basement of building 346 (underneath the cleanroom).

The Atomika SIMS analyses the composition of a sample by secondary ion mass spectroscopy. By using either oxygen or cesium ions accelerated by a high tension the surface of the sample is sputtered off as ions. These ions are analysed in a mass spectrometer and one can determine the elemental composition as a function of depth. If compared to signals from reference materials one can quantify the atomic composition - in certain cases down to extremely low concentrations (ppm). Doping levels and impurities may be determined.

Please note that no user will be instructed on the SIMS. Danchip staff will run your samples.

The user manual(s) and technical information and contact information can be found in LabManager:

The Atomika SIMS in Labmanager

An overview of the performance of the SIMS

Purpose	Determination of atomic composition	Doping level Sample contamination
Performance	Measurement accuracy depends on	Which atoms to be analysed The sample morphology (flat samples are much more suited than particles)
Process parameters	Ion gun parameters	Acceleration voltage, lens parameters Gas inlet pressures, apertures,
	Mass spectrometer parameters	Acceleration voltage, lens parameters Gas inlet pressures, apertures,
	Sample position	Acceleration voltage, lens parameters Gas inlet pressures, apertures,
Sample requirements	Substrate material allowed	In principle all materials
	Substrate size	The samples must be cut into 5x5 or 7x7 mm pieces Other types of samples must be mounted onto appropriately sized carriers
	Batch size	The sample holder carries up to 6 samples at the time