Specific Process Knowledge/Lithography/Coaters/SprayCoater

Spray Coater

Spray Coater in Cleanroom 3

Equipment		Spray Coater
Purpose		Spraying imprint resist Spraying photoresist Spraying of other solutions
Performance	Substrate handling	Can handle almost any sample size and shape
	Permanent media	No permanent media
	Manual dispense option	Two syringe pumps
Process parameter range	Solution viscosity	Range
	Chemical properties	Must be non-toxic Compatible with titanium Resistant to ultrasonic atomization
Substrates	Batch size	Any sample(s) that fit inside machine
	Allowed materials	All chemicals to be spray coated must be approved specifically for spray coating Any non-toxic, non-particulate and non-crosslinking material is likely to be approved

Feedback to this page: click here

Spin Track 1 + 2 is an SVG 88 series track system from Rite Track. Both tracks have a HMDS priming module, a spin coater, and a hotplate. In fack, the only difference between the two tracks is the resist used in the spin coating. Spin Track 1 + 2 is capable of handling 150 mm wafers, as well as 100 mm wafets, but is currently set up for 100 mm wafer processing.

The user manual(s), quality control procedure(s) and results, user APV(s), technical information and contact information can be found in LabManager

Process information

Link to process pages - e.g. one page for each material

Example:

• Etch of silicon using RIE
• Etch of silicon oxide using RIE
• Etch of silicon nitride using RIE
• Etch of photo resist using RIE

Equipment performance and process related parameters

Equipment		Equipment 1	Equipment 2
Purpose		Purpose 1 Purpose 2	Purpose 1 Purpose 2 Purpose 3
Performance	Response 1	Performance range 1 Performance range 2	Performance range 1 Performance range 2 Performance range 3
	Response 2	Performance range	Performance range
Process parameter range	Parameter 1	Range	Range
	Parameter 2	Range	Range
Substrates	Batch size	# small samples # 50 mm wafers # 100 mm wafers # 150 mm wafers	# small samples # 50 mm wafers # 100 mm wafers # 150 mm wafers
	Allowed materials	Allowed material 1 Allowed material 2	Allowed material 1 Allowed material 2 Allowed material 3