Specific Process Knowledge/Etch/Etching of Aluminium
< Specific Process Knowledge | Etch
Jump to navigation
Jump to search
Revision as of 15:15, 12 March 2013 by BGE (talk | contribs) (→Comparison of Aluminium Etch Metodes)
Feedback to this page: click here
Etching of Aluminium
Etching of aluminium can be done either by wet etch, dry etch or by sputtering with ions.
Comparison of Aluminium Etch Metodes
Al wet etch 1 | Al wet etch 2 | ICP metal | IBE (Ionfab300+) | |
---|---|---|---|---|
Generel description | Wet etch of pure Al | Wet etch of Al + 1.5% Si | Dry plasma etch of Al | Sputtering of Al - pure physical etch |
Etch rate range |
|
|
|
|
Etch profile |
|
|
|
|
Substrate size |
|
|
|
Smaller pieces glued to carrier wafer
|
Allowed materials |
|
|
|
|