Specific Process Knowledge/Etch/DRIE-Pegasus/StandardRecipes

Overview of the standard processes: Processes A, B, C, D and SOI

The instrument was accepted on the basis of the performance of 5 processes. Below is a general comparison - to find more detailed information, go the web page for each process

Standard processes on the DRIE-Pegasus

Process name	Type	Purpose	Conditions during original runs				Best usage
			Feature	Mask material	Etch load	Comments
Process A	Bosch	Fast etch	80 µm trench	Photo resist	12-13 % on 6" wafer
Process B	Bosch	Fast etch	30 µm diameter via	Photo resist	12-13 % on 6" wafer

Equipment		Equipment 1	Equipment 2
Purpose		Purpose 1 Purpose 2	Purpose 1 Purpose 2 Purpose 3
Performance	Response 1	Performance range 1 Performance range 2	Performance range 1 Performance range 2 Performance range 3
	Response 2	Performance range	Performance range
Process parameter range	Parameter 1	Range	Range
	Parameter 2	Range	Range
Substrates	Batch size	# small samples # 50 mm wafers # 100 mm wafers # 150 mm wafers	# small samples # 50 mm wafers # 100 mm wafers # 150 mm wafers
	Allowed materials	Allowed material 1 Allowed material 2	Allowed material 1 Allowed material 2 Allowed material 3