Specific Process Knowledge/Thin film deposition/Deposition of Tantalum

Feedback to this page: click here

Tantalum can be deposited by e-beam evaporation. In the chart below you can compare the different deposition equipment.

	E-beam evaporation (Alcatel)	Sputter (Lesker)
Batch size	Up to 1x4" wafers smaller pieces	up to 1x6" wafer
Pre-clean	RF Ar clean	RF Ar clean
Layer thickness	10Å to 1µm	10Å to
Deposition rate	2Å/s to 15Å/s	~0.3Å/s