Specific Process Knowledge/Lithography/Coaters/GammaDUV

Spin coater: Süss stepper

The SÜSS Spinner-Stepper is placed in F-3

This spinner is dedicated for spinning DUV resists. The spinner is fully automatic and can run up to 25 substrates in a batch 4", 6", and 8" size (8" requires tool change). The machine is equipped with the 3 resist lines (DUV42S-6, KRF M230Y, and KRF M35G), as well as a syringe dispense system.

The user manual, quality control procedures and results, user APVs, and contact information can be found in LabManager:

Equipment info in LabManager - requires login

DUV resist overview

The spinning process will be performed by the customer together with the Photolith group of Nanolab. In case you would like to do DUV lithography please contact Lithography team, who will consult you and run your wafers together with you.

Bottom Anti Reflection Coating (BARC):

• Manufacturers website: DUV 42S-6
• Datasheet: DUV42S-6 - requires login

Positive DUV resist for spin coating in 600-300nm thickness range:

• Manufacturers website: KrF M230Y
• Datasheet: KrF M230Y - requires login

Positive DUV resist for spin coating in 1600-800nm thickness range:

• Manufacturers website: KrF M35G
• Datasheet: KrF M35G - requires login

Negative DUV resist for spin coating in 1400-800nm or diluted with EC Solvent in 1:1 in 400-200nm thickness range:

• Manufacturers website: UVN2300-0.8
• Datasheet: UVN2300-0.8 - requires login

Process information

• General Process Information
• Quality Control (QC)
• Standard Processes

Equipment performance and process related parameters

Purpose		Spin coating and soft baking of BARC Spin coating and soft baking of DUV resists Post exposure baking
Resist		BARC DUV42S-6 Positive tone resist KRF M230Y Positive tone resist KRF M35G Negative tone resist UVN2300-0.8
Performance	Coating thickness	BARC DUV42S-6 60-90nm Positive tone resist KRF M230Y 300-600nm Positive tone resist KRF M35G 800-1600nm Negative tone resist UVN2300-0.8 200-1400nm
Process parameters	Spin speed	10 - 5000 rpm
	Spin acceleration	100 - 10000 rpm/s
	Hotplate temperature	175°C for BARC baking 130°C for positive tone resist soft baking and post exposure baking 100°C for negative tone resist soft baking and post exposure baking
Substrates	Substrate size	100 mm wafers 150 mm wafers 200 mm wafers (requires tool change)
	Allowed materials	Any standard cleanroom material
	Batch	1 - 25