Specific Process Knowledge/Thin film deposition/Deposition of TiW
Feedback to this page: click here
Deposition of TiW alloy can take place in the Wordentec.
| Sputter deposition (Wordentec) | |
|---|---|
| Batch size |
|
| Pre-clean | RF Ar clean |
| Layer thickness | . |
| Deposition rate | Depending on process parameters, see here. |
Deposited rates
This is done by a sputtering process. Process parameters (argon pressure and effect) can be varied, the surface roughness and the deposition rate (see here) and may change with these settings.
Deposited film characteristics
AFM pictures show how the surface roughness is dependent of the process parameters, this can be seen here.