LabAdviser/314/Microscopy 314-307/Postprocessing

Feedback to this page: click here

At DTU Cen you will find a small PC lab where there is access to all the processing and productivity software available at DTU Cen. The lab is located in building 307 room 101.There are five workstations which you can access with your DTU credentials. The following software is installed on all workstations:

Microsoft Office 2010

Digital Micrograph v1.85 (TEM image processing and analysis)

TIA v4.7 SP2 (TEM/STEM image processing and analysis) (ask Cen staff for access)

JEMS v4.3905 (TEM/STEM/Diffraction analysis and simulation)

AZtec v3.1b (SEM and TEM) (EDX spectrum and map analysis)

INCA v5.0.5 (EDX analysis)

Avizo v9.0.1 (3D rendering)

Crystalmaker v9.2.7 (Crystal structure building)

Crystaldiffract v6.5.5 (Diffraction analysis)

Single crystal v2.3.3 (Diffraction from single crystals)

Additionally, some of the workstations have node-locked licenses to:

PANalytical X’pert Highscore Plus (XRD data analysis): Cen-Himmelbjerg, Cen-Froebjerg, Cen-Valbybakke

Inspect 3D (Tomography reconstruction): Cen-Himmelbjerg, Cen-Froebjerg

TrueImage v2.0.1 (TEM image reconstruction): Cen-Himmelbjerg, Cen-Froebjerg, Cen-Valbybakke, Cen-Yding

Esprit 2.0 (EBSD analysis): Cen-Himmelbjerg, Cen-Froebjerg, Cen-Valbybakke, Cen-Yding

Please remember to log out when you have finished your work. Do not turn off the workstations.