Specific Process Knowledge/Thermal Process/Annealing

Feedback to this page: click here

Annealing

At Danchip we have three furnaces and an RTP (Rapid thermal annealing) that can be used annealing: C1, C3, Noble furnace and Jipelec RTP. Annealing normally takes place in an N₂ atmosphere. PECVD PBSG glass is annealed in a wet atmosphere which will also oxidize the silicon substrate.

The recipes for oxidation are made so that a 20 minutes N₂ annealing step is included after the oxiation step.

Comparison of the annealing furnaces

	C1: Anneal Oxide	C3: Anneal Bond	Noble furnace	Jipelec RTP	Multipurpose Anneal Furnace
General description	Annealing of 4" and 6" wafers. Annealing of wafers from the LPCVD furnaces and PECVD2.	Annealing of wafers from EVG-NIL, PECVD3 and wafers with aluminum.	Annealing of almost all materials on silicon wafers.	Rapid thermal annealing	Annealing, oxidation and resist pyrolysis of different samples
Annealing gas	N₂	N₂ Ar Wet annealing with bobbler (water steam + N₂)	N₂ Ar	N₂ Vacuum is possible	N₂ H₂ Vacuum is possible
Process temperature	700 ^oC - 1100 ^oC	700 ^oC - 1150 ^oC	20 ^oC - 1000 ^oC	20 ^oC - 1000 ^oC Ramp up to 300 C/min	Vacuum: 20 ^oC - 1050 ^oC¨ No vacuum: 20 ^oC - 1100 ^oC
Substrate and Batch size	Small samples on a carrier wafer, horizontal 1-30 50 mm wafers 1-30 100 mm wafers 1-30 150 mm wafers	Small samples on a carrier wafer, horizontal 1-30 50 mm wafers 1-30 100 mm wafers	Small samples on a carrier wafer, horizontal 1-25 50 mm wafers 1-25 100 mm wafers, vertical and horizontal	Small samples on a carrier wafer, horizontal One 100 mm wafers on a carrier wafer	1-30 50 mm, 100 mm or 150 mm wafers per run 1-50 200 mm wafers per run Smaller samples (placed in a Si carrier wafer)
Allowed materials	All processed wafers have to be RCA cleaned, except wafers from LPCVD furnaces and PECVD1.	All processed wafers have to be RCA cleaned, except wafers from EVG-NIL, PECVD3 and wafers for annealing of aluminum.	Almost all materials, permission is needed.	III-V samples Silicon wafers Some metals	Depends on the furnace quartz ware: Clean: Samples that have been RCA cleaned Metal: Almost all materials, permission is needed Resist Pyrolysis