Specific Process Knowledge/Thin film deposition/Deposition of NiV

From LabAdviser

Nickel Vanadium can be deposited by sputter evaporation. In the chart below you can compare the different deposition equipment.


Sputter deposition (PVD co-sputter/evaporation) Sputter deposition (Sputter-System Lesker)
Batch size
  • 12x2" wafers or
  • 12x4" wafers or
  • 4x6" wafers
  • Pieces or
  • 1x4" wafer or
  • 1x6" wafer
Pre-clean RF Ar clean RF Ar clean
Layer thickness About 10Å to 4000Å About 10Å to 5000Å
Deposition rate Depending on process parameters. Depending on process parameters.
Allowed materials
  • Silicon oxide
  • Silicon (oxy)nitride
  • Photoresist
  • PMMA
  • Mylar
  • SU-8
  • Metals
  • Silicon
  • Silicon oxide
  • Silicon nitride
  • Silicon (oxy)nitride
  • Photoresist
  • PMMA
  • Mylar
  • SU-8
  • Metals
  • Carbon
Comment Sputter target with NiV composition: Ni/V 93/7% Sputter target with NiV composition: Ni/V 93/7%
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Thin_film_deposition/Deposition_of_NiV&oldid=12902"