Specific Process Knowledge/Lithography/Coaters

Coaters: Comparison Table

Equipment		SSE Spinner	KS Spinner	Spin Track 1 + 2
Purpose		Spinning and baking of AZ5214E resist Spinning and baking of AZ4562 resist Spinning and baking of e-beam resist	Spinning and baking of AZ5214E resist Spinning and baking of AZ4562 resist Spinning and baking of SU8 resist	In-line substrate HMDS priming Coating and baking of AZ MiR 701 (29cps) resist Coating and baking of AZ nLOF 2020 resist Post-exposure baking at 110°C
Performance	Substrate handling	Cassette-to-cassette Edge handling chuck	Single substrate Non-vacuum chuck for fragile substrates	Cassette-to-cassette
	Permanent media	AZ5214E resist AZ4562 resist Acetone for chuck cleaning Acetone for drip pan	AZ5214E resist PGMEA for edge bead removal Acetone for chuck cleaning	AZ MiR 701 (29cps) resist AZ nLOF 2020 resist PGMEA for backside rinse and edge-bead removal PGMEA for spinner bowl cleaning and vapor tip bath
	Manual dispense option	2 automatic syringes	yes pneumatic dispense for SU8 resist	no
Process parameter range	Spindle speed	Range	Range	10 - 9990 rpm
Process parameter range	Parameter 2	Range	Range	Range
Substrates	Batch size	24 50 mm wafers 24 100 mm wafers 24 150 mm wafers	1 100 mm wafer 1 150 mm wafer	25 100 mm wafers
	Allowed materials	Allowed material 1 Allowed material 2	Allowed material 1 Allowed material 2 Allowed material 3	Silicon Glass

SSE Spinner

Feedback to this page: click here

The SSE spinner MAXIMUS: positioned in Cleanroom 13. SSE Spinner, Maximus 804, SSE Sister Semiconductor Equipment is a resist spinning system at Danchip which can be used for spinning on 2", 4" and 6" substrates.

The system is equipped with 2 different resists lines:

AZ5214E and
AZ4562 and
2 syringe lines, which can be used for spinning of e-beam resist.

The user manual(s), quality control procedure(s) and results and contact information can be found in LabManager: Equipment info in LabManager

A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here.

Spin Track 1 + 2

Feedback to this page: click here

Spin Track 1 + 2 is an SVG 88 series track system from Rite Track. Each track consists of a HMDS priming module, a spin coating module, and a baking module. In fact, the only difference between the two tracks is the resist used in the spin coating module. Spin Track 1 + 2 is capable of handling 150 mm wafers, as well as 100 mm wafers, but is currently set up for 100 mm wafer processing.

The Spin Track 1 + 2 is controlled using the Recipe Manager software via the touchscreen on the arm attached to the lefthand end of the track. Recipes for the individual modules are developed by Danchip and combined into flows. The user selects a flow (specific to track 1 or 2), and the appropriate recipes will be downloaded and executed on the appropriate track. The other track runs an empty process (no wafers needed), and can unfortunately not be used by a second user while the first user is processing.

The user manual(s), quality control procedure(s) and results, user APV(s), technical information and contact information can be found in LabManager

Process information

Equipment performance and process related parameters

Spin Track		1	2
Purpose		HMDS priming Spin coating and soft baking Priming, coating, and baking	HMDS priming Spin coating and soft baking Priming, coating, and baking Post-exposure baking
Resist		AZ MiR 701 (29cps) positive tone	AZ nLOF 2020 negative tone
Performance	Coating thickness	1 - 3 µm	1.6 - 5 µm
Performance	HMDS contact angle	60 - 90° (on SiO2)
Process parameters	Spin speed	10 - 9990 rpm
	Spin acceleration	1000 - 50000 rpm/s
	Hotplate temperature	90°C	110°C
	HMDS priming temperature	50°C
Substrates	Substrate size	100 mm wafers
	Allowed materials	Silicon (with oxide, nitride, or metal films or patterning) Glass (borosilicate and quartz)
	Batch	1 - 25

KS Spinner

A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here.

Manual Spinner 1 (Laurell)

The Manual Spinner(Polymers) is placed in fumehood in Cleanroom 3.

A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here. A lot of text here.