Specific Process Knowledge/Etch/ASE (Advanced Silicon Etch): Difference between revisions
No edit summary |
|||
| Line 3: | Line 3: | ||
The ICP-DRIE (Inductively Coupled Plasma - Deep Reactive Ion Etcher) tool at Danchip is manufactured by STS and is called the ASE (Advanced Silicon Etcher). The main purpose of the ASE is etching of silicon using Bosch process. | The ICP-DRIE (Inductively Coupled Plasma - Deep Reactive Ion Etcher) tool at Danchip is manufactured by STS and is called the ASE (Advanced Silicon Etcher). The main purpose of the ASE is etching of silicon using Bosch process. | ||
==The Bosch process:== | ==The Bosch process: Etching of silicon== | ||
The Bosch process uses alternation between an etch cycle and a passivation cycle. Introducing a passivation step in an etch process is very beneficial for the control of the angle of the sidewalls in the etch process because it allows us to cover them with a protective layer that suppresses the isotropic etching. Combined with the high plasma density in the ICP chamber, the excellent sidewall control enables us to etch high aspect ratio structures | The Bosch process uses alternation between an etch cycle and a passivation cycle. Introducing a passivation step in an etch process is very beneficial for the control of the angle of the sidewalls in the etch process because it allows us to cover them with a protective layer that suppresses the isotropic etching. Combined with the high plasma density in the ICP chamber, the excellent sidewall control enables us to etch high aspect ratio structures in silicon with very high etch rates. | ||
In the case of the silicon etching on the ASE, an etch phase with SF<sub>6</sub> and O<sub>2</sub> alternates with a passivation phase with C<sub>4</sub>F<sub>8</sub>. | In the case of the silicon etching on the ASE, an etch phase with SF<sub>6</sub> and O<sub>2</sub> alternates with a passivation phase with C<sub>4</sub>F<sub>8</sub>. | ||
=== The two standard silicon etch recipes === | |||
Two recipes have been optimized for the ASE. Their specification is on a 10 % etch load wafer with trenches. | Two recipes have been optimized for the ASE. Their specification is on a 10 % etch load wafer with trenches. | ||