Specific Process Knowledge/Etch/ASE (Advanced Silicon Etch): Difference between revisions
No edit summary |
No edit summary |
||
| Line 34: | Line 34: | ||
New process | New process | ||
{| border="1" cellpadding="5" cellspacing=" | {| border="1" cellpadding="5" cellspacing="10" | ||
|- | |- | ||
! Column 1 || Column 2 || Column 3 | ! Column 1 || Column 2 || Column 3 | ||
Revision as of 18:22, 22 November 2007
The ICP-DRIE (Inductively Coupled Plasma - Deep Reactive Ion Etcher) tool at Danchip is manufactured by STS and is called the ASE (Advanced Silicon Etcher). The main purpose of the ASE is etching of silicon using Bosch process.
The Bosch process:
The Bosch process uses alternation between an etch cycle and a passivation cycle. In the case of the silicon etching on the ASE, an etch phase with SF6 and O2 alternates with a passivation phase with C4F8.
Two recipes have been optimized for the ASE: A shallow etch shallolr and a deep etch deepetch.
| Process | Parameter | ! Phase
Etch |
|---|---|---|
| SF6 flow | 32 sccm | |
| O2 flow | 8 sccm | |
| Pressure | 80 mTorr | |
| RF-power | 30 W |
New process
| Column 1 | Column 2 | Column 3 |
|---|---|---|
| A | B | |
| C | D | |
| E | F | |
| G | ||
| H | ||