Specific Process Knowledge/Characterization/Profiler/Optical Profiler (Sensofar) acceptance test: Difference between revisions
| Line 20: | Line 20: | ||
| |||||| | | |||||| | ||
|- | |- | ||
| [[#Results_of_acceptance_test_no._1,_2_and_3|3]]||Patterned flat sample of silicon||Sample material: Patterned silicon substrate||Depth 85±2 µm | | [[#Results_of_acceptance_test_no._1,_2_and_3|3]]||Patterned flat sample of silicon||Sample material: Patterned silicon substrate <br/> Trench depth with aspect ratio 1:13 on a 6.4 µm wide trench||Depth 85±2 µm | ||
|- | |- | ||
| |||| | | |||||| | ||
|- | |- | ||
| [[#Results_of_acceptance_test_no._4|4]]||Patterned flat sample of glass||3D profile of pattern etched down in a quartz sample.||Depth within ±1% from a standard profiler measurement and repeatability (3 successive measurements) within 0.1% | | [[#Results_of_acceptance_test_no._4|4]]||Patterned flat sample of glass||3D profile of pattern etched down in a quartz sample.||Depth within ±1% from a standard profiler measurement and repeatability (3 successive measurements) within 0.1% | ||