Specific Process Knowledge/Back-end processing/PDMS Microfluidic: Difference between revisions

← Older edit Newer edit →

VisualWikitext

@@ Line 1: / Line 1: @@
 '''This page is under construction'''
-For further information contact Stephan Sylvest Keller suke@dtu.dk or Claudia Chaves Villarreal cchvi@dtu.dk
+''Unless otherwise stated, all content on this page was created by Claudia Chaves Villarreal, DTU Nanolab''
+'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php?title=Specific_Process_Knowledge/Characterization/XPS click here]'''
+==PDMS microfluidics fabrication at DTU Nanolab==
-'''Contents'''
-.      Material requirements
+==Material requirements==
-.      Process flow
+==Process flow==
-.      Mixing PDMS resin and degassing
+==Mixing PDMS resin and degassing==
-.      Soft lithography micro molding
+==Soft lithography micro molding==
-.1        Mold surface conditioning
+'''Mold surface conditioning'''
+'''Molding by pouring'''
-.2        Molding by pouring
+'''Molding by spin coating'''
-.3        Molding by spin coating.
+'''Baking – Curing'''
-.4        Baking – Curing
+'''Alignment – Demolding'''
-.5        Alignment – Demolding
+==3D printing==
-.      3D printing
+==Cutting PDMS==
-.      Cutting PDMS
+'''Punching'''
-.1        Punching
+'''Laser ablation'''
-.2        Laser ablation
+'''Machining/milling'''
-.3        Machining/milling
+'''Air/water jet machining'''
-.4        Air/water jet machining
+==Bonding==
-.      Bonding
+'''PDMS/PDMS and PDMS/glass bonding'''
-.1        PDMS/PDMS and PDMS/glass bonding
+'''PDMS/PMMA bonding'''
-.2        PDMS/PMMA bonding
+==References==
-.      References
+For further information contact Stephan Sylvest Keller suke@dtu.dk or Claudia Chaves Villarreal cchvi@dtu.dk