Specific Process Knowledge/Thin film deposition/Deposition of MoSi: Difference between revisions
Created page with "Molybdenum silicide is particularly attractive for optical coatings because co-sputtering Mo with Si allows precise control of MoSi stoichiometry—and, in turn, the film’s refractive index at the design wavelength. MoSi alloy can be deposited by DC co-sputtering in either Sputter-System Metal-Oxide (PC1) or Sputter-System Metal-Nitride (PC3)—collectively referred to as the Cluster Lesker. The process uses two 3-inch targets: *Mo (unbonded) *Si (indium-bonded) A..." |
No edit summary |
||
| Line 1: | Line 1: | ||
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Thin_film_deposition/Deposition_of_MoSi click here]''' | |||
<i> Unless otherwise stated, this page is written by <b>DTU Nanolab internal</b></i> | |||
<br clear="all" /> | |||
== Deposition of MoSi == | |||
Molybdenum silicide is particularly attractive for optical coatings because co-sputtering Mo with Si allows precise control of MoSi stoichiometry—and, in turn, the film’s refractive index at the design wavelength. | Molybdenum silicide is particularly attractive for optical coatings because co-sputtering Mo with Si allows precise control of MoSi stoichiometry—and, in turn, the film’s refractive index at the design wavelength. | ||