LabAdviser/Process Flow/Solar cell process flow: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| Line 117: | Line 117: | ||
|Expose photoresist in aligner | |Expose photoresist in aligner | ||
|The resist layer on the wafer frontside is exposed in the aligner, with a dark field mask. Align the mask to wafer flat, and use hard contact. | |The resist layer on the wafer frontside is exposed in the aligner, with a dark field mask. Align the mask to wafer flat, and use hard contact. | ||
|Here you can see a comparison between different [[ | |Here you can see a comparison between different [[ | ||
Specific Process Knowledge/Lithography/Resist#Exposure dose|aligners]]. | |||
|[[image:2 lithography mask 1.jpg|250x350px|center]] | |[[image:2 lithography mask 1.jpg|250x350px|center]] | ||
|- | |- | ||
| Line 278: | Line 279: | ||
|Expose photoresist in aligner | |Expose photoresist in aligner | ||
|The wafer needs to be aligned to the mask. "Hard contact" is recommended. | |The wafer needs to be aligned to the mask. "Hard contact" is recommended. | ||
|Here you can get information about exposure doses and development times depending on different resist types, thicknesses and equipment used. [[ | |Here you can get information about exposure doses and development times depending on different resist types, thicknesses and equipment used. [[Specific Process Knowledge/Lithography/Resist#Exposure dose|Lists of exposure doses and development times.]] | ||
|[[image:5 lithography mask 2.jpg|250x350px|center]] | |[[image:5 lithography mask 2.jpg|250x350px|center]] | ||
|- | |- | ||
| Line 286: | Line 287: | ||
|Develop photoresist | |Develop photoresist | ||
|In the development step the '''exposed resist is removed,''' and a resist pattern is formed on the surface. | |In the development step the '''exposed resist is removed,''' and a resist pattern is formed on the surface. | ||
|Comparison of different [[Specific Process Knowledge/Lithography/Development|developers]]. More details on development times dependent on equipment, resist, thickness and exposure doses can be seen here:[[ | |Comparison of different [[Specific Process Knowledge/Lithography/Development|developers]]. More details on development times dependent on equipment, resist, thickness and exposure doses can be seen here:[[Specific Process Knowledge/Lithography/Resist#Exposure dose|Lists of exposure doses and development times.]] | ||
|[[image:5_4_development.JPG|250x350px|center]] | |[[image:5_4_development.JPG|250x350px|center]] | ||
|- | |- | ||