Specific Process Knowledge/Characterization/Thickness Measurer

{cc-nanolab}}

Feedback to this page: click here

Thickness Measurer

Thickness Measurer. Positioned in cleanroom D-3

There are 2 thickness measurers in the cleanroom, both positioned in cleanroom D-3. The Thickness measurer is for measuring all sorts of samples. The thickness measurer (wafers) is solely for measuring the thickness of wafers or depths of grooves on wafers.

During a KOH etch it can be helpful to ensure no over-etching by making a thickness measurement during the etching.

The user manual, technical information and contact information can be found in LabManager.

Quality Control - Recipe Parameters and Limits

Quality Control (QC) for the Thickness measurer

The measured standard thickness is 0.1 mm. The measured result has to be within ± 0.005 mm. The QC is preformed once a year. The QC procedure The newest QC data

Equipment performance and process related parameters

Purpose	Thickness measurer	Wafer thickness Depths of larger grooves Heigth of larger samples
Performance	Thickness resolution	< 1 µm
Substrates	Batch size	One sample
	Substrate materials allowed	No restrictions

Purpose	Thickness measurer (wafers)	Wafer thickness Depths of larger grooves
Performance	Thickness resolution	< 1 µm
Substrates	Batch size	One sample
	Substrate materials allowed	Only wafers