Specific Process Knowledge/Etch/DRIE-Pegasus: Difference between revisions
| Line 8: | Line 8: | ||
Here, it is clear that one can distinguish two phases of the etch cycle; one where the ion bombardment removes the polymer and one where the actual etching takes place. Considering what process conditions are favorable we realize that | Here, it is clear that one can distinguish two phases of the etch cycle; one where the ion bombardment removes the polymer and one where the actual etching takes place. Considering what process conditions are favorable we realize that | ||
*the ion bombardment requires a low pressure in order for the ions to have a long mean free path and hence good directionality. A high platen power also drives ion bombardment. | *the ion bombardment requires a low pressure in order for the ions to have a long mean free path and hence good directionality. A high platen power also drives ion bombardment. | ||
*a higher pressure during the etch increases the density of reactive species and hence the etch rate. Since a high platen power is no longer necessary, lowering it will | *a higher pressure during the etch increases the density of reactive species and hence the etch rate. Since a high platen power is no longer necessary to drive the ion bombardement, lowering it will reduce the impact on the masking material thus improving the selectivity. | ||