Specific Process Knowledge/Pattern Design: Difference between revisions
| Line 27: | Line 27: | ||
== Mask Design for UV-lithography == | == Mask Design for UV-lithography == | ||
Here you can find tips and tricks for mask designing. | Here you can find tips and tricks for mask designing. | ||
* [[Media:Beginners guide to mask design using Clewin v1.4.pdf|"Beginners guide to mask design"]]. This is a guide how to design a set of mask. | * [[index.php?title=Media:Beginners guide to mask design using Clewin v1.4.pdf|"Beginners guide to mask design"]]. This is a guide how to design a set of mask. | ||
* [[Media:Guide to mask making.pdf| Guide to mask making.pdf]]. Unfortunately this is quite old guide to mask design, but may be useful anyway. Note some links/e-mails etc. are not correct anymore and the mask specifications (CU/CD, DF/BF, RR/WR) are no longer valid. | * [[index.php?title=Media:Guide to mask making.pdf| Guide to mask making.pdf]]. Unfortunately this is quite old guide to mask design, but may be useful anyway. Note some links/e-mails etc. are not correct anymore and the mask specifications (CU/CD, DF/BF, RR/WR) are no longer valid. | ||
* [[Media:Mask polarity and orientation.pdf| Mask polarity and orientation.pdf]]. This is an short guide how to specify the polarity and orientation of the mask when ordering as well as when used on our maskless aligners. Be aware that the specification of polarity and orientation when ordering at Compugraphics is not the same as when ordering at Delta Mask as we used to do. | * [[index.php?title=Media:Mask polarity and orientation.pdf| Mask polarity and orientation.pdf]]. This is an short guide how to specify the polarity and orientation of the mask when ordering as well as when used on our maskless aligners. Be aware that the specification of polarity and orientation when ordering at Compugraphics is not the same as when ordering at Delta Mask as we used to do. | ||
<br> | <br> | ||
===Alignment marks=== | ===Alignment marks=== | ||
The following alignment marks are suggested to use on the Mask aligners for good pattern recognition. Pleased be adviced that they can be removed in KOH etching. | The following alignment marks are suggested to use on the Mask aligners for good pattern recognition. Pleased be adviced that they can be removed in KOH etching. | ||
*Mask aligner: | *Mask aligner: | ||
**[[Media:Alignmentkeys1.cif|Alignment marks 1 (.cif)]] (Right click and Use "save link as...") - ''You need the program "Clewin" to open this file'' | **[[index.php?title=Media:Alignmentkeys1.cif|Alignment marks 1 (.cif)]] (Right click and Use "save link as...") - ''You need the program "Clewin" to open this file'' | ||
**[[Media:Alignmentkeys1.tdb|Alignment marks 1 (.tdb)]] - ''You need the program "L-Edit" to open this file'' | **[[index.php?title=Media:Alignmentkeys1.tdb|Alignment marks 1 (.tdb)]] - ''You need the program "L-Edit" to open this file'' | ||
*Maskless aligner: | *Maskless aligner: | ||
**[[Media:MLA AlignmentMarks simple.gds|Simple alignment marks (.gds)]] | **[[index.php?title=Media:MLA AlignmentMarks simple.gds|Simple alignment marks (.gds)]] | ||
**[[Media:MLA alignmentMarks arrows.gds|Alignment marks with structures to assist in locating the marks during alignment (.gds)]] | **[[index.php?title=Media:MLA alignmentMarks arrows.gds|Alignment marks with structures to assist in locating the marks during alignment (.gds)]] | ||
**[[Media:AlignmentMark KOH.gds|Alignment mark for multiple layers, Layer 1 for etch in KOH (.gds)]] | **[[index.php?title=Media:AlignmentMark KOH.gds|Alignment mark for multiple layers, Layer 1 for etch in KOH (.gds)]] | ||
<br> | <br> | ||
| Line 58: | Line 58: | ||
<br> | <br> | ||
=== Helpful information for chip layout === | === Helpful information for chip layout === | ||
*[[Media:Gamma coater & developer chucks + hotplate pins.gds|Gamma coater & developer chucks + hotplate pins.gds]] Design file showing the size of the chucks and the position of the hotplate pins in the Gamma tools. | *[[index.php?title=Media:Gamma coater & developer chucks + hotplate pins.gds|Gamma coater & developer chucks + hotplate pins.gds]] Design file showing the size of the chucks and the position of the hotplate pins in the Gamma tools. | ||
<BR> | <BR> | ||
== Mask Ordering and Fabrication == | == Mask Ordering and Fabrication == | ||
Our standard mask supplier is [https://www.macdermidalpha.com/semiconductor-solutions/compugraphics Compugraphics]. They can provide 5" and 7" masks on soda lime glass or quartz. Minimum feature size can be 0.8µm, 1µm or 1.5µm which is reflected in the price. Read a short guide on[[Media:Mask Ordering Guide.pdf| how to order photomasks from Compugraphics]] here. Templates for the mask specifications for 5" and 7" masks respectively can be seen [[mask_spec| here.]] | Our standard mask supplier is [https://www.macdermidalpha.com/semiconductor-solutions/compugraphics Compugraphics]. They can provide 5" and 7" masks on soda lime glass or quartz. Minimum feature size can be 0.8µm, 1µm or 1.5µm which is reflected in the price. Read a short guide on[[index.php?title=Media:Mask Ordering Guide.pdf| how to order photomasks from Compugraphics]] here. Templates for the mask specifications for 5" and 7" masks respectively can be seen [[mask_spec| here.]] | ||
The masks have to be ordered in Procure. Nanolab cannot order the mask for you but we do offer a final check of the design and mask specifications before you place the order. You can find a guide on [[Media:Maskordering in Fusion.pdf| how to order and attach design files in procure]] here. | The masks have to be ordered in Procure. Nanolab cannot order the mask for you but we do offer a final check of the design and mask specifications before you place the order. You can find a guide on [[index.php?title=Media:Maskordering in Fusion.pdf| how to order and attach design files in procure]] here. | ||
If you are using L-edit to design your mask you should remember to mark the top cell as the fabrication cell; a small pink <b style="color:magenta">''f''</b> should show to the left of the cell name in the Design Navigator. | If you are using L-edit to design your mask you should remember to mark the top cell as the fabrication cell; a small pink <b style="color:magenta">''f''</b> should show to the left of the cell name in the Design Navigator. | ||
| Line 71: | Line 71: | ||
Give each layer appropriate GDS number respectively CIF names before exporting the file. This is done by double click on the layers and fill out the window that pops up. | Give each layer appropriate GDS number respectively CIF names before exporting the file. This is done by double click on the layers and fill out the window that pops up. | ||
We can also provide guidance regarding the mask design phase. Please contact the | We can also provide guidance regarding the mask design phase. Please contact the Fabrication Support Team for help and review. | ||
*[[Media:Maskordering in Fusion.pdf| How to order and attach design files in DTU Fusion]] | *[[index.php?title=Media:Maskordering in Fusion.pdf| How to order and attach design files in DTU Fusion]] | ||
*[[mask_spec| Templates for 5" and 7" mask specifications]] | *[[mask_spec| Templates for 5" and 7" mask specifications]] | ||
<BR> | <BR> | ||