LabAdviser/Safety: Difference between revisions

The extent of the training program depends on which facilities (and equipment) you would like to access. There are generally two main tracks you can follow to access equipment at DTU Nanolab. One track allows you to enter the cleanroomin building 346. The other track provides you with an introduction to facilities outside of the cleanroom in building 346, 347, 314, or 307.   

For Accessing '''Equipment located in our''' '''cleanroom (building 346)''', please sign up here:

''Please note that this course gives you access to the cleanroom and the all other accessible facilities in 346. For special labs, f.ex. the Wet Lab, you need to follow the other track to gain access.''

For Accessing '''Equipment or''' '''Facilities Outside the Cleanroom (building 307, 314, 346,or 347)''', a general lab-introduction course for the labs outside the cleanroom, followed by a location-specific course is required.

For accessing fabrication and characterization equipment '''located in building 346 or 347''', but outside the cleanroom, please sign up here:

[https://www.nanolab.dtu.dk/access/other-facilities https://www.nanolab.dtu.dk/access/other-facilities]

For Accessing our '''Electron Beam Microscopy Equipment''' located in building 314 or 307, please sign up here:

[https://www.nanolab.dtu.dk/access/characterization https://www.nanolab.dtu.dk/access/characterization]

After registration for either program, you will be registered in our system by our administration. For access to our electron beam microscopy equipment, the [[Mailto:microscopysupport@nanolab.dtu.dk|Microscopy Support Team]] will assess your application and the responsible coordinator will contact you. For other equipment, you should receive an automatically generated email from DTU Nanolab with information regarding

<br>

== "DTU Nanolab Introductory Course: Cleanroom in B346" ==