LabAdviser/Safety: Difference between revisions

Line 54:

* Safety

* Cleanroom behavior

* Labmanager (equipment management system)

* Intorduction to Labmanager (equipment management system)

* Labadviser (equipment and process information Wiki)

* Intorduction to Labadviser (equipment and process information Wiki)

* Access agreement

After completing the online course (including the access agreement !), you can proceed to the hands-on training with one of our safety team members. You can sign up for the practical part on the last page of the online course in DTU Learn. The course is held on a weekly basis. There is an attendee limit of 3 persons per date. The course takes place in the cleanroom and takes about 2.5 hours, commonly from 9.00 - 11:30. In the course you will get a tour through our cleanroom, learn how to dress-up, and get an introduction to chemical handling. The meeting point is by the main entrance to building 347 (by the seminar room).

''Please note that you will <u>not</u> receive a confirmation for the registration for the hands-on course (only if the course is canceled).''

Line 83:

<br>

== "DTU Nanolab Introductory Course: Cleanroom in B346" ==

s

== "DTU Nanolab - Introduction course for Nanolab facility (Not Cleanroom in B346)" ==

This course is mandatory for all users that want to access any equipment located outside of the cleanroom on their own, f.ex. equipment in the basement of building 346 or in the PolyFabLab in 347, or any of the electron microscopes in building 314 or 307.

''Please note that the course "DTU Nanolab Introductory Course: Cleanroom in B346" gives you access to some facilities in building 346, e.g. equipment in the basement, or the dicing saw or tabletop SEM on the first floor, while special labs, e.g. the Wet Lab, requires this course to gain access.''

'''“Mandatory study material and quiz”'''

This online introductory course is divided into several parts. All facilities have a common part dealing with

* General lab safety

*Intorduction to Labmanager (equipment management system)

* Intorduction to Labadviser (equipment and process information Wiki)

* Access agreement

After completing the mandatory part (including the access agreement !), you can proceed to the location-specific parts of the introduction. There is no hands-on training connected to this first part. To register for specific facitilities, please click on “Open the Checklist” (opens a new webpage). On this webpage you can select several locations. Please read the information on the check list carefully to be able to select the correct courses.

Once you selected all required parts, pleas return to the course on DTU Learn ("Introduction course for Nanolab facility (Not Cleanroom in B346)"). You will now find additional modules for the selected facilities.

Following locations are available:

'''Building B314/B307'''

* General access to B314/B307

* Access to the Prep-lab2 B314 R040

* Access to the Softmatter lab B307 R903

* Access to Research-lab Optical Microscopy lab B307 R109/R113

''Please note that you need to finish the “General access to B314/B307” before you get access to the other three parts.''

'''Building 346 (notcleanroom)'''

* Access to building 346 (all labs, except the Wet lab)

* Access to the Wet Lab building 346

This course part is required to gain access to building 346 for labs outside of the cleanroom, f.ex the Laser Micromachining Tool, the Hot Embosser 1, the XRD RotAnode, the dicing saws, or the SEM Tabletop 1. After completion of the online course, you are ready to request training for the respective equipment. There is no hands-on safety training required.

Access to the wetlab concludes with a short practical introduction to the wetlab. ''Once you complete the online training, you can contact the Safety trainer for an appointment for the practical part.''

'''Building 347 (PolyFabLab, PackLab and Basement labs)'''

- General access to B347

- Access to PolyFabLab cleanroom

- Access to PolySupLab (Not available yet)

- Access to PDMS Lab (Not available yet)

Please note that you need to finish the "General access to B347" before you get access to the other three parts.