Revision as of 15:10, 28 March 2025

THIS PAGE IS UNDER CONSTRUCTION

=<span style="background:#FF2800">THIS PAGE IS UNDER CONSTRUCTION</span>[[image:Under_construction.png|200px]]=

Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.

All links to Kemibrug (SDS) and Labmanager Including APV and QC requires login.

Feedback to this page: click here

	Mo wet etch	Specific_Process_Knowledge/Etch/Dry etch
Generel description	Wet etch of Mo using Chrome etch 18	Dry etch of Mo
Etch rate range	120 nm etch after 30 sec (not tested yet)	(not tested yet)
Etch profile	Isotropic	Anisotropic (not tested yet)
Masking material	AZ resist as a mask (hard baked at 120C for 120sec) led to an under etch of 2ish µm	Not tested yet
Substrate size	Any size and number that can go inside the beaker in use
Allowed materials	No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals

@@ Line 6: / Line 6: @@
 =<span style="background:#FF2800">THIS PAGE IS UNDER CONSTRUCTION</span>[[image:Bge-Under construction.jpg|200px]]=
 -->
+'''Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.'''
+'''All links to Kemibrug (SDS) and Labmanager Including APV and QC requires login.'''
+'''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php/Specific_Process_Knowledge/Etch/Etching_of_Molybdeum click here]'''
 ==Comparison of Molybdenum Etch Methods==