Jump to content

LabAdviser: Difference between revisions

Bghe (talk | contribs)
No edit summary
Reet (talk | contribs)
m linguistic corrections and condensing intro text
Line 4: Line 4:


<!--LabAdviser is a process handbook for equipment and processes at the cleanroom facilities and the characterisation facilities in building 314/307. The function and capacity of each piece of equipment is described and general process steps, eg photolithography procedures, are clarified. LabAdviser is meant to advise you to a good starting point for your cleanroom process for further optimization to meet your needs. To enter LabAdviser you need to '''log in with your DTU login'''. LabAdviser is only editable for DTU Nanolab employees. If you need further information about certain machinery or processes, please contact Nanolab personnel. Any feedback you might have on LabAdviser is welcome and can be given by mail to the LabAdviser mailbox: [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk]-->
<!--LabAdviser is a process handbook for equipment and processes at the cleanroom facilities and the characterisation facilities in building 314/307. The function and capacity of each piece of equipment is described and general process steps, eg photolithography procedures, are clarified. LabAdviser is meant to advise you to a good starting point for your cleanroom process for further optimization to meet your needs. To enter LabAdviser you need to '''log in with your DTU login'''. LabAdviser is only editable for DTU Nanolab employees. If you need further information about certain machinery or processes, please contact Nanolab personnel. Any feedback you might have on LabAdviser is welcome and can be given by mail to the LabAdviser mailbox: [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk]-->
LabAdviser is a wiki designed for users of the DTU Nanolab facilities. If you are not a current user you are free to surf around, and also [https://www.nanolab.dtu.dk/english '''please take a look at our homepage''']. You can also take a [https://www.nanolab.dtu.dk/capabilities/cleanroom-3d-tour'''virtual tour of the DTU Nanolab cleanroom facility'''] or explore our [https://www.youtube.com/channel/UCJhdUTUJRDNODNiC3V95RQQ '''YouTube channel'''] with a selection of training videos. <br>
LabAdviser is a wiki designed for users of the DTU Nanolab facilities. If you are not a current user you are free to surf around, and also [https://www.nanolab.dtu.dk/english '''please take a look at our homepage''']. You can also take a [https://www.nanolab.dtu.dk/capabilities/cleanroom-3d-tour'''virtual tour of the DTU Nanolab cleanroom facility'''] or explore our [https://www.youtube.com/channel/UCJhdUTUJRDNODNiC3V95RQQ '''YouTube channel'''] with a selection of training videos. <br>


LabAdviser contains information about  
LabAdviser contains information about  
*equipment at DTU Nanolab that covers micro and nano fabrication in the cleanroom facility in building 346 and surroundings (in building 346 and 347) and characterization equipment, primarily electron microscopy, at building 314 and 307.
*Equipment for micro- and nanofabrication in the DTU Nanolab cleanroom facility in building 346 and surroundings (in building 346 and 347)  
*fabrication steps in micro and nano fabrication that takes place at the cleanroom fabrication facility and surroundings and  
*Characterization equipment, primarily electron microscopy, in building 314 and 307.
*electron microscopy methods that takes place at building 314/307.  
*Fabrication steps in micro- and nanofabrication that take place at the cleanroom fabrication facility and surroundings; and
An overview of the equipment in these facilities can be found and some fabrication process flows and singles fabrication steps are described. In general LabAdviser is meant to advise you to the right equipment and to advise you to a good starting point for your micro and nano fabrication steps as for your electron microscopy work. This should not be replacing communication with the staff of the facilities but we recommend it as a good starting point before contacting the staff. To enter LabAdviser you need to '''log in with your DTU login'''. LabAdviser is only editable for the staff of the facilities. If you need further information about certain machinery or processes, please contact the relevant staff. Any feedback or input you might have to LabAdviser is welcome and can be given by mail to the LabAdviser mailbox: [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk]
*Electron microscopy methods that take place in building 314/307.
An overview of the equipment in these facilities is given and some fabrication process flows and singles fabrication steps are described. In general LabAdviser is meant to help you find the right equipment and give you a good starting point for micro- and nanofabrication as well as for electron microscopy. This should not replace communication with the staff of the facilities but we recommend reading LabAdviser material as preparation before contacting staff. To be able to edit LabAdviser you need to '''log in with your DTU login''' (only for staff of the facilities). If you need further information about certain machinery or processes, please contact the relevant staff. Feedback and input is welcome by email to: [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk]
<br>
<br>




'''News in LabAdviser:''' <br/>
'''News in LabAdviser:''' <br/>
*The latest LabAdviser update: [[Media:Monthly_LabAdviser_update_20231110.docx|LabAdviser update send out 2023-11-10]] <br>
*The latest LabAdviser update: [[index.php?title=Media:Monthly LabAdviser update 20231110.docx|LabAdviser update sent out 2023-11-10]] <br>
*Slides from the latest Tech Forum are here: https://sites.dtu.dk/ffunanolab <br/>
*Slides from the latest Tech Forum: https://sites.dtu.dk/ffunanolab <br/>


== Contents ==
== Contents ==