Specific Process Knowledge/Etch/DRIE-Pegasus/Pegasus-4/SiO2 Etch: Difference between revisions
| Line 80: | Line 80: | ||
</gallery> | </gallery> | ||
== | ==SiO2 etch with Cr mask== | ||
{{CC-bghe2}} <br> | {{CC-bghe2}} <br> | ||
===Testing with electromagnetic coils /Cr mask=== | |||
{{CC-bghe2}} <br> | |||
*[[/Cr mask|More tests with Cr mask]] | |||
When testing with decreased platen power on the SiO2_10 standard recipe the uniformity got very bad. I then tested with the electromagnetics coil to see if that could affect the uniformity. There is an outer coil that can be varied between 0 A and 10 A and an inner coil that can be varied between 0 A and 30 A. The first tests were done on Si/SiO2(1µm) without pattern and measured on the ellipsometer. | When testing with decreased platen power on the SiO2_10 standard recipe the uniformity got very bad. I then tested with the electromagnetics coil to see if that could affect the uniformity. There is an outer coil that can be varied between 0 A and 10 A and an inner coil that can be varied between 0 A and 30 A. The first tests were done on Si/SiO2(1µm) without pattern and measured on the ellipsometer. | ||
| Line 140: | Line 144: | ||
File:C09721_center_22.jpg | File:C09721_center_22.jpg | ||
</gallery> | </gallery> | ||