Specific Process Knowledge/Etch/Etching of Silicon Nitride

Silicon nitride can be etched using either wet chemistry or dry etch equipment. Wet chemistry is mainly used to remove all the nitride on the surface (backside and frontside) of a wafer. Dry etching etches one side at a time and can be used to etch structures with several masking materials.

• Wet Silicon Nitride Etch
• Etch of Silicon Nitride using RIE

Comparison of wet Silicon Nitride etch and RIE etch for etching of Silicon Nitride

	Wet Silicon Nitride etch	RIE
What is it good for:	Isotropic etch Good for removing all nitride on a wafer surface without a mask	Anisotropic etch: vertical sidewalls
Possible masking materials:	?	Photoresist Silicon Oxide Aluminium Chromium (ONLY RIE2!)
Etch rate		Typically 40-50 nm/min can be increased or decreased by using other recipe parameters.
Process volume	25 wafers at a time	1 wafer at a time
Size of substrate	4" wafers	4" wafers or smaller pieces