Specific Process Knowledge/Etch/DRIE-Pegasus/Pegasus-4/Barc Etch: Difference between revisions
Created page with "==Barc etch with O2== ''By bghe@nanolab June 2020'' ===Sample=== *6" Si * 2µm SiO2 from C1 *90nm barc *907 nm UVN 2030-0,5 *Reticle: Pegreticle *Dose: 200 J/m2 ===Pegasus 4 s..." |
No edit summary |
||
| Line 1: | Line 1: | ||
==Barc etch with O2== | ==Barc etch with O2== | ||
''By | ''By Berit Herstrøm, DTU Nanolab June 2020'' | ||
===Sample=== | ===Sample=== | ||
*6" Si | *6" Si | ||
Revision as of 11:22, 3 February 2023
Barc etch with O2
By Berit Herstrøm, DTU Nanolab June 2020
Sample
- 6" Si
- 2µm SiO2 from C1
- 90nm barc
- 907 nm UVN 2030-0,5
- Reticle: Pegreticle
- Dose: 200 J/m2
Pegasus 4 settings
- Recipe: Barc O2
- With 30 mm spacers
SEM images after barc etching
- C06207_02 Barc O2 30s
-
50% load, 4000 nm pitch, barc has been etched with a little undercut -
50% load, 2000 nm pitch, barc has been etched with a little undercut -
75% load, 1600 nm pitch, barc has been etched with a little undercut -
50% load, 400 nm pitch, barc has been etched with a little undercut expect where the lines have collided -
50% load, 1300 nm pitch -
50% load, 800 nm pitch
