Specific Process Knowledge/Thin film deposition/Deposition of Titanium Nitride: Difference between revisions
m updated contact email and removed an outdated link |
|||
Line 21: | Line 21: | ||
![[Specific Process Knowledge/Thin film deposition/ALD2 (PEALD)|ALD2]] | ![[Specific Process Knowledge/Thin film deposition/ALD2 (PEALD)|ALD2]] | ||
![[Specific_Process_Knowledge/Thin_film_deposition/Cluster-based_multi-chamber_high_vacuum_sputtering_deposition_system|Sputter-System Metal-Nitride (PC3)]] | ![[Specific_Process_Knowledge/Thin_film_deposition/Cluster-based_multi-chamber_high_vacuum_sputtering_deposition_system|Sputter-System Metal-Oxide (PC1)/Sputter-System Metal-Nitride (PC3)]] | ||
![[Specific Process Knowledge/Thin film deposition/Lesker|Sputter-System(Lesker)]] | ![[Specific Process Knowledge/Thin film deposition/Lesker|Sputter-System(Lesker)]] | ||
|- | |- |
Revision as of 13:51, 30 August 2022
Feedback to this page: click here
Deposition of Titanium Nitride
Thin films of Titanium Nitride (TiN) can be deposited by either ALD or reactive sputtering. If sputtering is used, the target is Ti and nitrogen (N2) is added as reactive gas to the chamber resulting the formation of Titanium Nitride on the sample. The process information is available below:
Comparison between sputtering and ALD methods for deposition of Titanium Nitride.
ALD2 | Sputter-System Metal-Oxide (PC1)/Sputter-System Metal-Nitride (PC3) | Sputter-System(Lesker) | |
---|---|---|---|
Generel description |
|
|
|
Stoichiometry |
|
|
|
Film Thickness |
|
|
|
Deposition rate |
|
|
|
Step coverage |
|
|
|
Process Temperature |
|
|
|
Substrate size |
|
|
|
Allowed materials |
|
|
|