Specific Process Knowledge/Direct Structure Definition: Difference between revisions
| Line 134: | Line 134: | ||
|medium: 5-10 wafers/hour depending on imprint time | |medium: 5-10 wafers/hour depending on imprint time | ||
|Fast: Typically 10-300 samples/hour | |Fast: Typically 10-300 samples/hour | ||
| | |Fabricate two blank shims (usually from aluminum foil, electroplated, nickel or milled aluminum) to protect the upper and lower press plate from polymer or other material runoff. If uniformity is an issue, the suggested procedure is to make two x PDMS foils, in order to make the force distribution as uniform as possible. The foils should be placed between the protective SHIM/CHUCK and the pressure plates | ||
|medium-slow: 0.1-1 wafers/hour depending on pattern complexity | |medium-slow: 0.1-1 wafers/hour depending on pattern complexity | ||
|medium: ½-3 wafers/hour depending on material and # of cuts (Si cuts at 5mm/s, SiO2 at 0.5-1 mm/s) | |medium: ½-3 wafers/hour depending on material and # of cuts (Si cuts at 5mm/s, SiO2 at 0.5-1 mm/s) | ||