Revision as of 09:45, 16 October 2018

XPS analysis of ALD deposited layers

This section assumes that you are familiar with the basic operations of data processing in Avantage. If not, then press HERE and go through this part first.

How to get the data used in the example below

The wiki does not allow uploading of *.zip data files so the zipped data file has been renamed to a *.xls file. Therefore, do the following:

Download this File:Experiment 2.xls.
Rename the downloaded file Experiment_2.xls to Experiment_2.zip
Extract to a folder on a local drive (right click and select 'Extract all'). Avantage will not work on network drives.
Double click on the Experiment 2.VGX file and Avantage should start.

Guidelines on data processing

Click HERE to see some general guidelines on data processing in Avantage.

@@ Line 10: / Line 10: @@
 # Double click on the ''Experiment 2.VGX'' file and Avantage should start.
-== How to fit data with multiple spectra and levels ==
+== Guidelines on data processing ==
-; Use one processing grid to hold all spectra to be fitted.
-: Each processing grid has a peak table that holds all the peaks for each level. Making depth profiles cannot be made across processing grids. Survey spectra must be kept in separate grids - if not the peak table of the survey spectrum will get mixed with the high resolution spectra.
-; Do not mix snapshot and scanned spectra in processing grid
+Click [[Specific Process Knowledge/Characterization/XPS/Processing/Guidelines|'''HERE''']] to see some general guidelines on data processing in Avantage.
-: