Jump to content

Specific Process Knowledge/Etch/DRIE-Pegasus/processA: Difference between revisions

← Older editNewer edit →
VisualWikitext
Jmli (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
4,579 edits
Jmli (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
4,579 edits
Line 639: Line 639:
|-
|-
| Trench width (µm)||||5,1||6,7||9,3||11,4||13,7||18,6||29,0||44,5||54,4||80,5||106,7||156,9||207,4||310,1
| Trench width (µm)||||5,1||6,7||9,3||11,4||13,7||18,6||29,0||44,5||54,4||80,5||106,7||156,9||207,4||310,1
|-
|}
|}
= Standard Process A 110 cycles =
Post process images:
[[file:C01549.01-A.jpg |200px|frameless|C01549.01 ]]
[[file:C01549.02-A.jpg |200px|frameless|C01549.02 ]]
[[file:C01549.03.jpg |200px|frameless|C01549.03 ]]
[[file:C01549.04-A.jpg |200px|frameless|C01549.04 ]]
[[file:C01549.04-B.jpg |200px|frameless|C01549.04 ]]
{| border="2" cellpadding="0" cellspacing="0" style="text-align:center;"
|+ '''Travkatesting2: Process A run for 110 cycles on travka 5, 10, 20, 35 masks'''
|-
! width="30" rowspan="2" | Date
! width="40" rowspan="2"| Substrate Information
! width="50" rowspan="2"| Process Information
! colspan="15"| SEM images of trenches
! rowspan="2" | Numbers
|-
! 2 µm
! 3 µm
! 4 µm
! 6 µm
! 8 µm
! 10 µm
! 15 µm
! 25 µm
! 40 µm
! 50 µm
! 75 µm
! 100 µm
! 150 µm
! 200 µm
! 300 µm
|-
| January 2013
| Travka05, 600 nm oxide, '''5% open'''
| Process A 110 cycles or 20:10 minutes, '''C01549.01'''
| [[file:C01549.01 002mu 0129.jpg |75px|frameless ]]
| [[file:C01549.01 004-3mu 0128.jpg |75px|frameless ]]
| [[file:C01549.01 004-3mu 0128.jpg |75px|frameless ]]
| [[file:C01549.01 008-6mu 0127.jpg |75px|frameless ]]
| [[file:C01549.01 008-6mu 0127.jpg |75px|frameless ]]
| [[file:C01549.01 010mu 0126.jpg |75px|frameless ]]
| [[file:C01549.01 015mu 0125.jpg |75px|frameless ]]
| [[file:C01549.01 025mu 0124.jpg |75px|frameless ]]
| [[file:C01549.01 040mu 0123.jpg |75px|frameless ]]
| [[file:C01549.01 050mu 0122.jpg |75px|frameless ]]
| [[file:C01549.01 075mu 0121.jpg |75px|frameless ]]
| [[file:C01549.01 100mu 0120.jpg |75px|frameless ]]
| [[file:C01549.01 150mu 0119.jpg |75px|frameless ]]
| [[file:C01549.01 200mu 0118.jpg |75px|frameless ]]
| [[file:C01549.01 300mu 0117.jpg |75px|frameless ]]
|
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Trench width (µm)'''
| align="center" style="background:#f0f0f0;"|'''2'''
| align="center" style="background:#f0f0f0;"|'''3'''
| align="center" style="background:#f0f0f0;"|'''4'''
| align="center" style="background:#f0f0f0;"|'''6'''
| align="center" style="background:#f0f0f0;"|'''8'''
| align="center" style="background:#f0f0f0;"|'''10'''
| align="center" style="background:#f0f0f0;"|'''15'''
| align="center" style="background:#f0f0f0;"|'''25'''
| align="center" style="background:#f0f0f0;"|'''40'''
| align="center" style="background:#f0f0f0;"|'''50'''
| align="center" style="background:#f0f0f0;"|'''75'''
| align="center" style="background:#f0f0f0;"|'''100'''
| align="center" style="background:#f0f0f0;"|'''150'''
| align="center" style="background:#f0f0f0;"|'''200'''
| align="center" style="background:#f0f0f0;"|'''300'''
|-
| Etched depth (µm)||175||195||209||229||247||260||289||330||370||393||428||454||488||507||523
|-
| Av. ER (µm/min)||8,7||9,7||10,4||11,3||12,3||12,9||14,4||16,3||18,3||19,5||21,2||22,5||24,2||25,2||25,9
|-
| Av. Scllp hght (nm)||1591||1772||1902||2079||2247||2359||2631||2997||3364||3569||3888||4124||4434||4614||4751
|-
| Sdwall bowing (%)||0,12||0,20||0,30||0,35||0,32||0,35||0,40||0,30||0,41||0,24||0,33||0,32||0,47||0,71||0,00
|-
| Sdwall angle (degs)||89,6||89,9||89,9||90,1||90,2||90,3||90,7||90,9||91,1||91,4||91,5||91,5||91,2||91,6||91,7
|-
| Trench width (µm)||8,5||9,5||10,8||13,2||16,0||18,4||22,6||33,0||48,0||57,5||82,7||106,8||159,0||207,0||306,8
|-
|}
|-
| January 2013
| Travka10, 600 nm oxide, '''10% open'''
| Process A 110 cycles or 20:10 minutes, '''C01549.02'''
| [[file:C01549.02 002mu 0085.jpg |75px|frameless ]]
| [[file:C01549.02 003mu 0084.jpg |75px|frameless ]]
| [[file:C01549.02 004mu 0083.jpg |75px|frameless ]]
| [[file:C01549.02 006mu 0082.jpg |75px|frameless ]]
| [[file:C01549.02 008mu 0081.jpg |75px|frameless ]]
| [[file:C01549.02 010mu 0080.jpg |75px|frameless ]]
| [[file:C01549.02 015mu 0079.jpg |75px|frameless ]]
| [[file:C01549.02 025mu 0078.jpg |75px|frameless ]]
| [[file:C01549.02 040mu 0077.jpg |75px|frameless ]]
| [[file:C01549.02 050mu 0076.jpg |75px|frameless ]]
| [[file:C01549.02 075mu 0075.jpg |75px|frameless ]]
| [[file:C01549.02 100mu 0074.jpg |75px|frameless ]]
| [[file:C01549.02 150mu 0073.jpg |75px|frameless ]]
| [[file:C01549.02 200mu 0072.jpg |75px|frameless ]]
| [[file:C01549.02 300mu 0071.jpg |75px|frameless ]]
|
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Trench width (µm)'''
| align="center" style="background:#f0f0f0;"|'''2'''
| align="center" style="background:#f0f0f0;"|'''3'''
| align="center" style="background:#f0f0f0;"|'''4'''
| align="center" style="background:#f0f0f0;"|'''6'''
| align="center" style="background:#f0f0f0;"|'''8'''
| align="center" style="background:#f0f0f0;"|'''10'''
| align="center" style="background:#f0f0f0;"|'''15'''
| align="center" style="background:#f0f0f0;"|'''25'''
| align="center" style="background:#f0f0f0;"|'''40'''
| align="center" style="background:#f0f0f0;"|'''50'''
| align="center" style="background:#f0f0f0;"|'''75'''
| align="center" style="background:#f0f0f0;"|'''100'''
| align="center" style="background:#f0f0f0;"|'''150'''
| align="center" style="background:#f0f0f0;"|'''200'''
| align="center" style="background:#f0f0f0;"|'''300'''
|-
| Etched depth (µm)||164||179||190||209||224||238||263||300||337||358||388||404||438||452||469
|-
| Av. ER (µm/min)||8,1||8,9||9,4||10,4||11,1||11,8||13,1||14,9||16,7||17,7||19,2||20,0||21,7||22,4||23,2
|-
| Av. Scllp hght (nm)||1489||1626||1730||1899||2034||2163||2395||2724||3063||3251||3526||3671||3978||4110||4262
|-
| Sdwall bowing (%)||0,20||0,41||0,46||0,57||0,74||0,62||0,68||0,75||0,58||0,99||0,54||0,49||0,72||0,51||0,77
|-
| Sdwall angle (degs)||89,7||90,0||89,9||90,1||90,2||90,3||90,8||91,2||91,5||91,3||92,0||92,2||92,6||92,8||93,6
|-
| Trench width (µm)||7,9||8,7||10,4||12,6||16,1||18,1||22,8||33,5||49,3||58,1||83,1||108,6||157,0||207,1||301,3
|-
|}
|-
| January 2013
| Travka20, 600 nm oxide, '''20% open'''
| Process A 110 cycles or 20:10 minutes, '''C01549.03'''
| [[file:C01549.03 002mu 0087.jpg |75px|frameless ]]
| [[file:C01549.03 003mu 0088.jpg |75px|frameless ]]
| [[file:C01549.03 004mu 0089.jpg |75px|frameless ]]
| [[file:C01549.03 006mu 0090.jpg |75px|frameless ]]
| [[file:C01549.03 008mu 0091.jpg |75px|frameless ]]
| [[file:C01549.03 010mu 0092.jpg |75px|frameless ]]
| [[file:C01549.03 015mu 0093.jpg |75px|frameless ]]
| [[file:C01549.03 025mu 0094.jpg |75px|frameless ]]
| [[file:C01549.03 040mu 0095.jpg |75px|frameless ]]
| [[file:C01549.03 050mu 0096.jpg |75px|frameless ]]
| [[file:C01549.03 075mu 0097.jpg |75px|frameless ]]
| [[file:C01549.03 100mu 0098.jpg |75px|frameless ]]
| [[file:C01549.03 150mu 0099.jpg |75px|frameless ]]
| [[file:C01549.03 200mu 0100.jpg |75px|frameless ]]
| [[file:C01549.03 300mu 0101.jpg |75px|frameless ]]
|
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Trench width (µm)'''
| align="center" style="background:#f0f0f0;"|'''2'''
| align="center" style="background:#f0f0f0;"|'''3'''
| align="center" style="background:#f0f0f0;"|'''4'''
| align="center" style="background:#f0f0f0;"|'''6'''
| align="center" style="background:#f0f0f0;"|'''8'''
| align="center" style="background:#f0f0f0;"|'''10'''
| align="center" style="background:#f0f0f0;"|'''15'''
| align="center" style="background:#f0f0f0;"|'''25'''
| align="center" style="background:#f0f0f0;"|'''40'''
| align="center" style="background:#f0f0f0;"|'''50'''
| align="center" style="background:#f0f0f0;"|'''75'''
| align="center" style="background:#f0f0f0;"|'''100'''
| align="center" style="background:#f0f0f0;"|'''150'''
| align="center" style="background:#f0f0f0;"|'''200'''
| align="center" style="background:#f0f0f0;"|'''300'''
|-
| Etched depth (µm)||142||153||164||181||195||206||228||258||287||303||326||342||366||380||392
|-
| Av. ER (µm/min)||7,0||7,6||8,1||9,0||9,7||10,2||11,3||12,8||14,2||15,0||16,2||17,0||18,2||18,8||19,4
|-
| Av. Scllp hght (nm)||1288||1390||1493||1647||1775||1877||2073||2342||2612||2754||2967||3108||3331||3451||3561
|-
| Sdwall bowing (%)||0,54||0,77||1,08||0,83||1,06||0,91||0,95||1,07||0,88||0,75||0,95||0,05||0,83||0,73||0,46
|-
| Sdwall angle (degs)||89,6||89,6||89,8||90,2||90,3||90,6||90,9||91,5||91,6||91,8||92,3||93,3||92,5||92,9||93,0
|-
| Trench width (µm)||7,2||8,7||9,9||12,4||14,7||16,9||22,8||31,1||48,4||58,0||81,9||108,6||160,4||209,9||311,1
|-
|}
|-
| January 2013
| Travka35, 600 nm oxide, '''35% open'''
| Process A 110 cycles or 20:10 minutes, '''C01549.04'''
| [[file:C01549.04 003mu 0115.jpg |75px|frameless ]]
| [[file:C01549.04 003mu 0116.jpg |75px|frameless ]]
| [[file:C01549.04 004mu 0114.jpg |75px|frameless ]]
| [[file:C01549.04 006mu 0113.jpg |75px|frameless ]]
| [[file:C01549.04 008mu 0112.jpg |75px|frameless ]]
| [[file:C01549.04 010mu 0111.jpg |75px|frameless ]]
| [[file:C01549.04 015mu 0110.jpg |75px|frameless ]]
| [[file:C01549.04 025mu 0109.jpg |75px|frameless ]]
| [[file:C01549.04 040mu 0108.jpg |75px|frameless ]]
| [[file:C01549.04 050mu 0107.jpg |75px|frameless ]]
| [[file:C01549.04 075mu 0106.jpg |75px|frameless ]]
| [[file:C01549.04 100mu 0105.jpg |75px|frameless ]]
| [[file:C01549.04 150mu 0104.jpg |75px|frameless ]]
| [[file:C01549.04 200mu 0103.jpg |75px|frameless ]]
| [[file:C01549.04 300mu 0102.jpg |75px|frameless ]]
|
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Trench width (µm)'''
| align="center" style="background:#f0f0f0;"|'''2'''
| align="center" style="background:#f0f0f0;"|'''3'''
| align="center" style="background:#f0f0f0;"|'''4'''
| align="center" style="background:#f0f0f0;"|'''6'''
| align="center" style="background:#f0f0f0;"|'''8'''
| align="center" style="background:#f0f0f0;"|'''10'''
| align="center" style="background:#f0f0f0;"|'''15'''
| align="center" style="background:#f0f0f0;"|'''25'''
| align="center" style="background:#f0f0f0;"|'''40'''
| align="center" style="background:#f0f0f0;"|'''50'''
| align="center" style="background:#f0f0f0;"|'''75'''
| align="center" style="background:#f0f0f0;"|'''100'''
| align="center" style="background:#f0f0f0;"|'''150'''
| align="center" style="background:#f0f0f0;"|'''200'''
| align="center" style="background:#f0f0f0;"|'''300'''
|-
| Etched depth (µm)||||||131||146||155||164||181||205||226||234||254||264||277||284||292
|-
| Av. ER (µm/min)||||||6,5||7,2||7,7||8,2||9,0||10,2||11,2||11,6||12,6||13,1||13,8||14,1||14,5
|-
| Av. Scllp hght (nm)||||||1189||1325||1408||1495||1642||1867||2050||2125||2312||2398||2523||2584||2653
|-
| Sdwall bowing (%)||||||1,35||1,37||1,25||1,28||1,24||1,45||1,30||1,42||1,50||1,38||1,18||0,76||0,81
|-
| Sdwall angle (degs)||||||89,4||89,6||89,9||90,0||90,3||91,0||91,7||91,9||92,3||92,4||93,0||93,0||93,5
|-
| Trench width (µm)||||||8,8||11,3||13,5||16,0||21,2||31,1||46,3||56,5||81,2||108,0||157,7||210,0||310,4
|-
|-
|}
|}


|}
|}
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Etch/DRIE-Pegasus/processA"