Specific Process Knowledge/Characterization/Thickness Measurer: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
'''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php/Specific_Process_Knowledge/Characterization/ | '''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php/Specific_Process_Knowledge/Characterization/Thickness_Measurer click here]''' | ||
==Thickness measurer== | ==Thickness measurer== | ||
Revision as of 13:42, 19 January 2018
Feedback to this page: click here
Thickness measurer
The purpose is to measure the thickness of wafers, depths of larger grooves or height of larger mesas.
During a KOH etch it can be helpful to ensure no over-etching by making a thickness measurement during the etching.
The user manual, technical information and contact information can be found in LabManager:
Quality Control - Recipe Parameters and Limits
| Quality Control (QC) for the Thickness measurer |
|
The measured standard thickness is 0.1 mm. The measured result has to be within ± 0.005 mm. The QC is preformed once a year. |
|
Purpose |
Hardness measurer |
|
|---|---|---|
|
Performance |
Thickness resolution |
|
|
Substrates |
Batch size |
|
| Substrate materials allowed |
|