Specific Process Knowledge/Etch/III-V ICP/SiO2: Difference between revisions
No edit summary |
No edit summary |
||
| Line 33: | Line 33: | ||
|- | |- | ||
|Etch rate of PECVD BPSG | |Etch rate of PECVD BPSG | ||
|'''39.4nm/min (22-01-2016)''' | |'''39.4nm/min (22-01-2016)''' | ||
|- | |||
|Etch rate in thermal oxide | |||
|'''48nm/min''' (bghe 17-01-2017)- whole 4" wafer with capton tape | |||
|- | |- | ||
|Selectivity to resist [:1] | |Selectivity to resist [:1] | ||
Revision as of 15:27, 17 January 2017
Feedback to this page: click here
| Parameter | Parameter settings |
|---|---|
| Coil Power [W] | 200 |
| Platen Power [W] | 25 |
| Platen temperature [oC] | 20 |
| CF4 flow [sccm] | 20 |
| H2 flow [sccm] | 10 |
| Pressure [mTorr] | 3 |
| Results | SiO2 Etch Slow Test by Artem Shikin @ Fotonik |
|---|---|
| Etch rate of PECVD BPSG | 39.4nm/min (22-01-2016) |
| Etch rate in thermal oxide | 48nm/min (bghe 17-01-2017)- whole 4" wafer with capton tape |
| Selectivity to resist [:1] | Not known |
| Wafer uniformity (100mm) | Not known |
| Profile [o] | Not known |
| Wafer uniformity map (click on the image to view a larger image) | Not known |
| SEM profile images | NONE |
| Comment | Tested on a plane BPSG layer. The etch rate is much lower for an etch time of e.g. 5s |