Specific Process Knowledge/Characterization/Lifetime scanner MDPmap

THIS PAGE IS UNDER CONSTRUCTION

Feedback to this page: click here

Lifetime scanner MPDmap, positioned in cleanroom D-3.

Microwave Detected Photoconductivity (MDP)

Topographic visualisation of electrically active defects or materiel properties at almost any production stage, allows for process optimization and performance prediction of devices.

MDP is a contact less, non destructive measurement technology for the electrical characterization of a large variety of semiconductors. The mapping and visualization of so far not detectable defects was achieved by improving the sensitivity of a microwave detection system by several orders of magnitude. Electrical properties such as lifetime, τ, mobility, μ, and diffusion length, L, can be measured also at very low injection levels with a spatial resolution limited only by the diffusion length of the charge carriers.

The user manual, control instruction, the user APV and contact information can be found in LabManager:

Lifetime scanner MPDmap info page in LabManager,

Equipment performance and process related parameters

Equipment		Lifetime scanner MDPmap
Purpose		Carrier Lifetime Photoconductivity
Location		D-3
Instrument specifics	Detector	Microwave detector
	Laser	405 nm Power 5 mW to 100 mW 978 nm Power 5 mW to 140 mW 975 nm Power 0.5 W to 4.0 W Spot diameter for all laser 0.5 µm
Substrates	Size	Sample sizs between 5 mm x 5 mm up to 16" or 210 mm x 210 mm Sample thickness 10 µm to 20 mm
	Allowed materials	Any standard cleanroom materials.