Jump to content

Specific Process Knowledge/Lithography/UVLithography: Difference between revisions

← Older editNewer edit →
VisualWikitext
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,528 edits
Tigre (talk | contribs)
DCH-Employees-701
2,257 edits
Line 23: Line 23:
** For dry or wet etch processes, investigate the resist etch rate of your process as this might limit the minimum thickness of your resist.
** For dry or wet etch processes, investigate the resist etch rate of your process as this might limit the minimum thickness of your resist.


* '''Substrate pretreatment''': In many processes it is recommended to [[Specific_Process_Knowledge/Lithography/Pretreatment|pretreat or prime]] your wafer before spin-coating. In some [[Specific_Process_Knowledge/Lithography/Coaters|spin-coaters]], these pretreatment processes are included in the spin coating of resist. If you use either the '''RCD8, SSE or a manual spin coater''', you should add a pretreatment step prior to spin coating in your process flow.
* '''Substrate pretreatment''': In many processes it is recommended to [[Specific_Process_Knowledge/Lithography/Pretreatment|pretreat or prime]] your wafer before spin-coating. In some [[Specific_Process_Knowledge/Lithography/Coaters|spin-coaters]], these pretreatment processes are included in the spin coating of resist.  


* '''Mask''': Design and order a photomask for your UV process. A detailed instruction on how to design and order a photomask can be found [[Specific_Process_Knowledge/Lithography/Pattern_Design_and_Mask_Fabrication|here]].
* '''Mask''': Design and order a photomask for your UV process. A detailed instruction on how to design and order a photomask can be found [[Specific_Process_Knowledge/Lithography/Pattern_Design_and_Mask_Fabrication|here]].
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Lithography/UVLithography"