Specific Process Knowledge/Lithography/EBeamLithography/BEAMER: Difference between revisions
| Line 40: | Line 40: | ||
! width="300" | | ! width="300" | | ||
|- border="0" | |- border="0" | ||
|[[File:beamer1.jpg| | |[[File:beamer1.jpg|350px|left]] | ||
|[[File:beamer2.jpg| | |[[File:beamer2.jpg|350px|center]] | ||
|[[File:beamer3.jpg| | |[[File:beamer3.jpg|350px|right]] | ||
|- align="center" | |- align="center" | ||
| Import a GDSII-file by dragging the 'Import' module to the process flow area. Select the file. In the 'Import Layout' window, type the layer number to import or type * if you wish to import all layers. || Export the GDSII file to v30 by dragging an 'Export' module on top of the 'Import' icon. An 'Export JEOL' window appears. || In the tab 'General' of this export window, choose JBX9300FS (100kV). In the tab 'Advanced', type the correct field size (maximum is 1000 mm in both X and Y). The fields will be distributed automatically by choosing 'Fixed'. In case you have small patterns, is it recommended to tick 'Center to Field'. | | Import a GDSII-file by dragging the 'Import' module to the process flow area. Select the file. In the 'Import Layout' window, type the layer number to import or type * if you wish to import all layers. || Export the GDSII file to v30 by dragging an 'Export' module on top of the 'Import' icon. An 'Export JEOL' window appears. || In the tab 'General' of this export window, choose JBX9300FS (100kV). In the tab 'Advanced', type the correct field size (maximum is 1000 mm in both X and Y). The fields will be distributed automatically by choosing 'Fixed'. In case you have small patterns, is it recommended to tick 'Center to Field'. | ||