Specific Process Knowledge/Lithography/Development/Developer TMAH UV-lithography processing: Difference between revisions
| Line 33: | Line 33: | ||
*'''DCH 100mm SP 30s''' | *'''DCH 100mm SP 30s''' | ||
*'''DCH 100mm SP 60s''' | *'''DCH 100mm SP 60s''' | ||
*'''DCH 100mm SP 120s''' | |||
*'''DCH 150mm SP 60s''' | *'''DCH 150mm SP 60s''' | ||
Each of these sequences start with a 2s pre-wet at 1200 rpm using developer. The puddle dispense is done at a rotation of 30rpm. The dispense time is 3s, and 7s for 100mm, and 150mm, respectively. The development (puddle time) is split in two by an agitation step of 2s at 30rpm (one rotation). Spin-off is 3s at 4000rpm. Finally, the wafer is rinsed as described above. | Each of these sequences start with a 2s pre-wet at 1200 rpm using developer. The puddle dispense is done at a rotation of 30rpm. The dispense time is 3s, and 7s for 100mm, and 150mm, respectively. The development (puddle time) is split in two by an agitation step of 2s at 30rpm (one rotation). Spin-off is 3s at 4000rpm. Finally, the wafer is rinsed as described above. | ||