Specific Process Knowledge/Back-end processing/Die Bonder: Difference between revisions
| Line 24: | Line 24: | ||
With a dispensing tool small amounts of solder paste or glue is dispensed on the substrate with high accuracy. The substrate could for example be a printed circuit board (PCB). After some experience with the machine, it is possible to place dots with different shapes and sizes on the surface. With a placement tool a chip can then be picked up upside down and by the use of a camera unit, it is possible to align the contacts on the chip to the solder/glue dots on the on the substrate before joining the two surfaces with a light pressure. The stack is subsequently cured and an underfill glue can be dispensed to enhance the bonding strength between chip and substrate. | With a dispensing tool small amounts of solder paste or glue is dispensed on the substrate with high accuracy. The substrate could for example be a printed circuit board (PCB). After some experience with the machine, it is possible to place dots with different shapes and sizes on the surface. With a placement tool a chip can then be picked up upside down and by the use of a camera unit, it is possible to align the contacts on the chip to the solder/glue dots on the on the substrate before joining the two surfaces with a light pressure. The stack is subsequently cured and an underfill glue can be dispensed to enhance the bonding strength between chip and substrate. | ||
The Flip Chip Bonder is placed in Danchip's Packlab building 347, 1. floor. | |||
'''The user manuals, user APVs, technical information and contact information can be found in LabManager:''' | '''The user manuals, user APVs, technical information and contact information can be found in LabManager:''' | ||