Specific Process Knowledge/Back-end processing/Laser Micromachining Tool/fluence: Difference between revisions

Revision as of 08:40, 12 May 2014

Fluence definition

The fluence produces by a laser is, by definition, the energy delivered by a laser pulse ( $E_{p u l s e}$ ) per surface unit ( $S$ ) and it is given in J/cm2.

The function $E_{p u l s e}$ is defined as :

E_{p u l s e} = \frac{\overline{P}}{f}

Where $\overline{P}$ (average power) and is measured with the laser sensor power measurement (see laser manual section 5.3) and the repetion rate ( $f$ ) is set in the parameter file under " laser frequency".

The fluence is therefore determinate as such :

F l u e n c e = \frac{E_{p u l s e}}{S}

The theoretical spot sizes ( $S$ ) can be found here

Revision as of 08:40, 12 May 2014 view source Chasil (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231 547 edits →Fluence ← Older edit		Revision as of 08:40, 12 May 2014 view source Chasil (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231 547 edits →Fluence Newer edit →
Line 1:		Line 1:
	== Fluence ==		== Fluence definition ==

	The fluence produces by a laser is, by definition, the energy delivered by a laser pulse (<math>E_{pulse}</math>) per surface unit (<math>S</math>) and it is given in J/cm2.		The fluence produces by a laser is, by definition, the energy delivered by a laser pulse (<math>E_{pulse}</math>) per surface unit (<math>S</math>) and it is given in J/cm2.