Specific Process Knowledge/Characterization/Thickness Measurer: Difference between revisions
| Line 25: | Line 25: | ||
*[http://www.labmanager.danchip.dtu.dk/view_binary.php?fileId=2062 The newest QC data]<br> | *[http://www.labmanager.danchip.dtu.dk/view_binary.php?fileId=2062 The newest QC data]<br> | ||
The measured standard is 0.1 mm. The measured result have to be within +- 0.005 mm. The QC is preformed ones a year. | The measured standard thickness is 0.1 mm. The measured result have to be within +- 0.005 mm. The QC is preformed ones a year. | ||
|} | |} | ||
Revision as of 11:06, 13 January 2014
THIS PAGE IS UNDER CONSTRUCTION
Feedback to this page: click here
Thickness measurer
The purpose is to measure the thickness of wafers, depths of larger grooves or height of larger mesas.
Doing a KOH etch can it be helpful to insure no over etching by making a thickness measurement doing the etch.
The user manual, technical information and contact information can be found in LabManager:
Process knowledge
Quality Control - Recipe Parameters and Limits
| Quality Control (QC) for the Thickness measurer |
|
The measured standard thickness is 0.1 mm. The measured result have to be within +- 0.005 mm. The QC is preformed ones a year. |
|
Purpose |
Measurer the thinkness of silicon wafer |
?? |
|---|---|---|
|
Performance |
?? |
?? |
|
Process parameter range |
Process Temperature |
|
| Process pressure |
| |
| Gasses on the system | ||
| Substrates | Batch size |
|
| Substrate materials allowed |
|
Feedback to this page: click here
This is a micrometer-screw.
It measures with an accurracy within a few µm. The range is from a few µm up to 5mm. Measure the wafer in the box next to the meter. If this is ok, then other wafers can be measured. There is a calibration device by the DEKTAK. It is calibrated at 750µm.