Specific Process Knowledge/Characterization/Drop Shape Analyzer: Difference between revisions

From LabAdviser
← Older editNewer edit →
VisualWikitext
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,292 edits
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,292 edits
Line 6: Line 6:
== The Drop Shape Analyzer ==
== The Drop Shape Analyzer ==


The Krüss DSA 100S Drop Shape Analyzer will analyze the shapes of drops of liquid on a surface or suspended from a needle in order to calculate the contact angle or the surface tension, respectively.  
The Krüss DSA 100S Drop Shape Analyzer will analyze the shape a drop of liquid on a surface, or suspended from a needle, in order to calculate the contact angle, or the surface tension, respectively.  


[[image:DropShapeAnalyzer.jpg|200x200px|right|thumb|The Krüss DSA 100s Drop Shape Analyzer]]
[[image:DropShapeAnalyzer.jpg|200x200px|right|thumb|The Krüss DSA 100s Drop Shape Analyzer]]


'''The user manual, user APV(s), technical information, and contact information can be found in LabManager:'''  
'''The user manual, user APV(s), technical information, and contact information can be found in LabManager:'''  
<!-- remember to remove the type of documents that are not present -->


<!-- give the link to the equipment info page in LabManager: -->
[http://labmanager.danchip.dtu.dk/function.php?module=Machine&view=view&mach=240  Drop Shape Analyzer in LabManager]
[http://labmanager.danchip.dtu.dk/function.php?module=Machine&view=view&mach=240  Drop Shape Analyzer in LabManager]


Revision as of 13:30, 10 January 2014

Feedback to this page: click here


THIS PAGE IS UNDER CONSTRUCTION

The Drop Shape Analyzer

The Krüss DSA 100S Drop Shape Analyzer will analyze the shape a drop of liquid on a surface, or suspended from a needle, in order to calculate the contact angle, or the surface tension, respectively.

The Krüss DSA 100s Drop Shape Analyzer

The user manual, user APV(s), technical information, and contact information can be found in LabManager:

Drop Shape Analyzer in LabManager

An overview of the performance of the Prism Coupler

Purpose Film thickness measurements and optical characterization of optically transparent thin films
  • Measurement of film thickness
  • Optical constants
Performance Thin film materials that can be measured

Film with a refractive index of less than 2.02 and that are transparent to the light in the given wavelength range ex:

  • Silicon Oxide
  • Silicon nitride
  • polymers
Film thickness range
  • ~1µm to 15 µm
Film thickness accuracy
  • ±(0.5%+50Å)
Index accuracy
  • ±0.001
Process parameter range Wavelength range

Can operate at two different wavelength:

  • 633 nm
  • 1550 nm
Substrates Batch size
  • One sample at a time - all sample larger than 5x5 mm2sizes up to 6"
Substrate material allowed
  • In principle all materials
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/Drop_Shape_Analyzer&oldid=12294"