Specific Process Knowledge/Characterization/Drop Shape Analyzer: Difference between revisions
| Line 6: | Line 6: | ||
== The Drop Shape Analyzer == | == The Drop Shape Analyzer == | ||
Krüss | The Krüss DSA 100S Drop Shape Analyzer will analyze the shapes of drops of liquid on a surface or suspended from a needle in order to calculate the contact angle or the surface tension, respectively. | ||
The Krüss DSA | [[image:DropShapeAnalyzer.jpg|200x200px|right|thumb|The Krüss DSA 100s Drop Shape Analyzer]] | ||
'''The user manual, user APV(s), technical information, and contact information can be found in LabManager:''' | '''The user manual, user APV(s), technical information, and contact information can be found in LabManager:''' | ||
<!-- remember to remove the type of documents that are not present --> | <!-- remember to remove the type of documents that are not present --> | ||
<!-- give the link to the equipment info page in LabManager: --> | <!-- give the link to the equipment info page in LabManager: --> | ||
Revision as of 13:20, 10 January 2014
Feedback to this page: click here
THIS PAGE IS UNDER CONSTRUCTION
The Drop Shape Analyzer
The Krüss DSA 100S Drop Shape Analyzer will analyze the shapes of drops of liquid on a surface or suspended from a needle in order to calculate the contact angle or the surface tension, respectively.
The user manual, user APV(s), technical information, and contact information can be found in LabManager:
Drop Shape Analyzer in LabManager
Process information
Link to process pages - e.g. one page for each material
Example:
- Etch of silicon using RIE
- Etch of silicon oxide using RIE
- Etch of silicon nitride using RIE
- Etch of photo resist using RIE