Specific Process Knowledge/Back-end processing/Die Bonder

Feedback to this page: click here

Die bonder (eutectic metal soldering)

The Cammax EDB80 Die bonder is for placing and soldering dies onto a package or substrate.

The user manual(s), quality control procedure(s) and results, user APV(s), technical information and contact information can be found in LabManager:

The Die-bonder Cammax EDB-80

Die Bonder in LabManager

Process information

• Au-Sn eutectic die bonding

Flip-chip bonder (glue attachment)

The Flip-chip bonder (No it is not the correct picture. new picture coming soon)

Flip-chip Bonder in LabManager (not there yet)

Equipment performance and process related parameters

Equipment		Die bonder	Flip-chip bonder
Purpose		Fine placement of dies Eutectic metal soldering	Fine placement of dies glue attachment
Performance		Low thermal resistance Always conducting	Medium or High thermal resistance Possibility of both conducting and isolating adhesives If an epoxy based adhesive is used the user is required to have the epoxy course.
Substrates	Allowed materials	Should be able to withstand the soldering temperature Typical materials are: Alumina (Al2O3), AluminumNitride (AlN)	Any that is compatible with the glue used