Specific Process Knowledge/Back-end processing/Laser Micromachining Tool: Difference between revisions

@@ Line 1: / Line 1: @@
 The Laser Micromachining Tool is a microSTRUCT vario from the company 3D-Micromac AG.
-The system is equipped with a 50W picosecond laser and a 100W nanosecond laser and is able to produce micro structures in different kinds of materials like metals, ceramics, composite materials, etc.
+ It is currently only for use by Danchip personel for internal training.
+ It will be public available some time during the first half year of 2013.
+The system is able to produce micro structures in different kinds of materials like metals, ceramics, composite materials, etc.
 The machine is located in the basement of building 346 under the cleanroom.
-It is equiopped with 2 high power lasers:
+It is equipped with 2 high power lasers:
+* a 50W picosecond laser that can emit light at 3 wavelengths: 355nm, 532nm and 1064nm and a
+* a 100W nanosecond laser with a wavelength of 1064nm.
-a 50W picosecond laser that can emit light at 3 wavelengths: 355nm, 532nm and 1064nm and a
+[[File:Laser_Micromachining_Tool_main_parts_drawing.jpg|400px|thumb|Lasertool microSTRUCT vario (3D-Micromac AG)]]
-a 100W nanosecond laser with a wavelength of 1064nm.
 It consist of these main parts:
+* Upper service way
+* Manual front door
-    Upper service way
+* Operating panel
-    Manual front door
+* Machine's feet (adjustable)
-    Operating panel
+* Left service way
-    Machine's feet (adjustable)
+* Electrical cabinet
-    Left service way
-    Electrical cabinet