Specific Process Knowledge/Etch/IBE⁄IBSD Ionfab 300/IBE magnetic stack etch: Difference between revisions
No edit summary |
|||
| Line 58: | Line 58: | ||
End point detection is achieved by SIMS, and the etch rate is approximately 25 Nm/min. | End point detection is achieved by SIMS, and the etch rate is approximately 25 Nm/min. | ||
Resist stripping can be hard due to burned resist, to remedy this try to lower the current. Changing the currect will chance the sidewall angle and new studies of etch profiles will be necessary. For help, discussion and further info please contact [mailto:kristian.rasmussen@nanotech.dtu.dk Kristian Hagsted Rasmussen]. | Resist stripping can be hard due to burned resist, to remedy this try to lower the current. Changing the currect will chance the sidewall angle and new studies of etch profiles will be necessary. For help, discussion and further info please contact [mailto:kristian.rasmussen@nanotech.dtu.dk Kristian Hagsted Rasmussen]. | ||
===Conclusions=== | |||