Specific Process Knowledge/Characterization/Profiler/Optical Profiler (Sensofar) acceptance test: Difference between revisions
| Line 54: | Line 54: | ||
| [[#Results of acceptance test no. 11|11]]||Measurements of multiple stacks||120 nm nitride on 110 nm oxide on a silicon substrate||Within ±2% on each layer from an ellipsometer measurement. | | [[#Results of acceptance test no. 11|11]]||Measurements of multiple stacks||120 nm nitride on 110 nm oxide on a silicon substrate||Within ±2% on each layer from an ellipsometer measurement. | ||
|- | |- | ||
| 12||Film thickness measurements of transparent films on small structure||Sample material: Si with 1.5 µm patterned AZ-resist||Within ±1% from a standard profiler measurement. | | [[#Results of acceptance test no. 12|12]]||Film thickness measurements of transparent films on small structure||Sample material: Si with 1.5 µm patterned AZ-resist||Within ±1% from a standard profiler measurement. | ||
|- | |- | ||
| ||||Measure thickness of AZ-resist on pillars of 50 µm in diameter|| | | ||||Measure thickness of AZ-resist on pillars of 50 µm in diameter|| | ||